VMH InverterFlex Mini-Split
Outdoor Unit Installation
Outdoor installation precaution
• Install the outdoor unit on a rigid base to prevent
increasing noise level and vibration.
• Determine the air outlet direction where the
discharged air is not blocked. If the installation
place is exposed to strong winds, ensure the unit
is lengthwise along the wall or provide a suitable
air baffle.
• If suspending the unit, follow the bracket manu-
facturer's instructions.
• Use a raised concrete pad or concrete blocks to
provide a solid, level surface. Securely anchor the
unit down with bolts.
• Be sure there are no obstacles which block radiat-
ing air.
• In a snowy area, install the outdoor unit on a raised
platform that is higher than drifting snow.
Anchoring outdoor unit
Anchor the outdoor unit with 5/16" (8mm) or 3/8"
(10mm) bolt and nut tightly and horizontally on a
concrete or rigid mount.
Outdoor unit dimensions
WxHxD in. (mm)
29.9 x 23.2 x 11.2 (760 x 590 x 285)
33.3 x 27.4 x 13.2 (845 x 695 x 335)
35.2 x 33.9 x 13.0 (895 x 860 x 330)
39.0 x 38.0 x 14.0 (990 x 965 x 355)
INSTALLATION MANUAL
Mounting Dimensions
A in. (mm)
B in. (mm)
20.9 (530)
11.4 (290)
22 (560)
13.2 (335)
23.2 (590)
13.1 (333)
24.5 (623)
14.4 (366)
9
Heat Controller, Inc.
Fig. 45