Table of Contents
Advertisement
IMPORTANT NOTE:
THE FOLLOWING FUNCTIONS ARE APPLICABLE ONLY TO DVD DISCS. IF OTHER DISC FORMATS ARE
PLAYED, SCREEN DISPLAY AND OPERATION WILL BE DIFFERENT.
OSD
Press this button and the screen will display some
information about disc, such as : " Title Elapsed " ,
" Title Remain ", " Chapter Elapsed ", " Chapter
Remain " and " Display Off ".
V.MODE
This button can set VIDEO output among CVBS ,
YUV , P-Scan , or HDMI .
Note: The screen will disappear when this button is
pressed, pressing this button continuously until the
screen turns to normal.
If there are picture
interferences or no picture, press "V.MODE" to
correct it.
SUBTITLE
Press this button and the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of languages; "XXXXXX" indicates the language of
available country.
(The number of languages depends on disc).
TITLE
Available on some DVD discs, press this button to
display the title menu, you can press buttons to
select the chapters preferred.
ZOOM
Press this button to zoom into the picture.
Each time the button is pressed, the magnification
level will change.
PAL/NTSC
Pressing this button will switch among NTSC, PAL
and AUTO.
ANGLE
For discs with this feature, pressing this button to view
Will allow action to be viewed from different angles.
(Depending on the DVD)
ADVANCED PLAYBACK
SEARCH
Press this button one time, the screen will display
search menu, pressing a second time will cancel the
dispay in search menu, you can use the UP/DOWN
cursor button to select the item that you want, Then
press the ENTER/PLAY button to confirm.
REPEAT
Press the REPEAT button and Chapter repeat will
be displayed on screen, pressing the button a second
time will display Title repeat, the third press will
display All repeat, the four press will cancel repeating.
For CD playing,the first press will display track, the
second press willdisplay all repeat, the third press will
cancel repeating.
A-B REPEAT
Press the " A-B RPT " button to begin start-point,
press again to set an end point and complete
the setting. The selected section A-B will be
repeated. The third press will cancel this function.
MENU
Press this button to display root menu, select item
according to your preference. (This key is valid to
DVDs possessing multi-layer menu.)
PROGRAM
Press this button and the screen will display info
window , press digits button to input the program
number what you want, when finished, move the
cursor to select the " Start " logo, at this time the unit
will start program playback and the screen will display
"Program" logo.
If you want to cancel this function, press the
" STOP "button and then press the ENTER/PLAY
button .
13
Advertisement
Table of Contents
