Table of Contents
Advertisement
2.1 ANALOG AUDIO SETUP PAGE
2.1.1 DOWNMlX SETUP
DOWNMIX MODE: sets front speakers to LTRT,
STEREO, V Surr or 5.1ch.
The first 3 settings (LTRT, STEREO, V Surr)
downmix the sound Signal for 2-Speakers. This
setting allows you to enjoy a surround sound effect
with onIy two speakers. For this reason a setup for
additional speakers (described in the following
sections) is disabled when DOWNMlX MODE is
set to these settings.
You have to set the DOWNMlX MODE to 5.1ch if you
have selected the Dolby Digital connection and
you would like to enjoy true Dolby Digital surround
sound. In this setting, the CENTER and REAR
speakers are active.
SPEAKER SETUP PAGE
Downmix
Ltrt
Ltrt
Front Speaker
Lrg
Stereo
Center Speaker
Lrg
V Surr
Rear Speaker
Lrg
5.1ch
Subwoofer
On
Post Drc
Auto
Set Downmix Mode
2.1.2 FRONT SPEAKER
FRONT SPEAKER: Sets front speakers volume
to Large, Small.
2.1.3 CENTER SPEAKER
CENTER SPEAKER: Sets center speakers volu-
me to Large, Small or Off.
2.1.4 REAR SPEAKER
REAR SPEAKER: Sets rear speakers to
volume Large, Small or Off.
2.1.5 SUBWOOFER SPEAKER
SUBWOOFER SPEAKER: Sets subwoofer spea-
kers to On or Off.
2.1.6 POST DRC
POST DRC (Dynamic Range Compression): the
setup can select to quieten loud explosions and
increases dialogue.
SYSTEM SETUP
2.2 DIGITAL AUDIO SETUP PAGE
2.2.1 SPDlF OUTPUT
SPDlF OUTPUT MODE: Sets the audio outputs.
SPDIF SETUP PAGE
Spdif Output
PCM
Lpcm Out
48K
Setup Spdif
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is
output through the back-paneI connections for L, R.
LS, RS, and Center speakers, and the Subwoofer
simulation.
2. SPDIF/RAW or SPDIF/PCM: This surround sound
format is output to a Dolby Digital decoder through
the optical and coaxial connectors on the back-
panel of the product.
Note:
The DVD player simultaneously outputs a Dolby
Digital signal and an analog signal, but you have
to select the Analog output if you want to take
advantage of the Karaoke effects.
2.2.2 LPCM OUTPUT
LPCM (Linear Pulse Code Modulation) OUTPUT:
Includes LPCM 48K , LPCM 96K for audio format.
2.3 DOLBY DlGlTAL SETUP
2.3.1 DUAL MONO
DUAL MONO:
If your amplifier / decoder has
Dolby Digital output, you may select stereo, left
mono, right mono, or mixed mono mode for your
amplifier decoder.
DOLBY DIGITAL SETUP
Dual Mono
Str
Dynamic
Dual Mono(1+1) Setup
18
Spdif Off
Spdif/raw
Spdif/pcm
Stereo
L-mono
R-mono
Mix-mono
Advertisement
Table of Contents
