Video Setup Page; Video Out - Grundig GDP1610HD Instruction Manual

2.3.2 DYNAMIC
DYNAMIC: This function is generally used when
playing high volume programs at night, in order
not to disturb others. This setting can dyna-
mically lower the volume and still keep the original
tone quality. This is the range, measured in deci-
bels(dB), between the loudest and the quietest
sound registers in a soundtrack.
2.4 CHANNEL DELAY SETUP PAGE
CHANNEL DELAY: Ideally speaking, the Dolby
Digital (AC-3)surround-sound system requires all
speakers to be deployed in a circle around the
listening area so that the audio effect can surround
the audience.However,this ideal deployment of the
sound sources may be unrealistic and un-achievable
in many circumstances. In such situations, you can
compensate for the deployment defects by adding
some delay to the center, rear and sub-woofer
speakers according to the distance to the front speaker.
You can set the delay by speaker distance for
center,left rear speaker(LS),right rear speaker(RS)
and sub-woofer speaker.
AUDIO SETUP PAGE
Speaker Setup
Spdif Setup
Dolby Digital Setup
Channel Delay
Eq ualizer
Hdcd
Center
2.5 EQUALIZER SETUP PAGE
2.5.1 EQ TYPE
EQ TYPE: Sets the audio output to simulate
the various kinds of music effect.
EQUALIZER PAGE
None
Eq Type
Bass Boost Off
Super Bass Off
Treble Boost Off
Select Equalizer Type
2.5.2 BASS BOOST
BASS BOOST: Enhance the bass degree.
2.5.3 SUPER BASS
SUPER BASS: Enhance the super bass degree.
2.5.4 TREBLE BOOST
TREBLE BOOST: Enhance the Treble boost
degree.
2.6 HDCD SETUP PAGE
2.6.1 FILTER
FILTER: Sets the ratio of filter.
Choose the sampling frequencies of digital
filter, the higher the sampling frequencies are, the
clearer the audio quality is. When default setting is
off, it will display "CD" by reading HDCD, for HDCD
playback, please choose 44.1K or 88.2K.

3. VIDEO SETUP PAGE

0 cm
Sub
woofer

3.1 VIDEO OUT

Sets the video output.
None
Rock
CVBS: Set to CVBS Output
Pop
YUV: Set to Y. U. V. Output
Live
Dance
Note: the default is CVBS, to valid Video out option,
Techno
you must set the HDMI in HDMI setup menu to ON.
Classic
Soft
3.2 TV MODE
Sets the scan mode to the same of your TV.
If there are picture interferences or no picture,
press "V.MODE" to correct it.
TV MODE option,you
19
SYSTEM SETUP
HDCD SETUP PAGE
Filter Off Off
44.1k
88.2k
Filter
VIDEO SETUP PAGE
Video out CVBS CVBS
YUV
Tv Mode
Video calibration
HDMI Setup
Video out
(To validate the
must select YUV ).