"A" button (#9) is used to switch the input mode.
LED has six indicator lights. The function of the indicator lights are described below:
The first light will be on when the DVR is powered on.
•
The second light will flicker when HDD is written to or read.
•
The third light will be on when you backup information in DVR.
•
The fourth light will be on when a computer connects with the DVR via the network.
•
The fifth light will be on when the DVR is playing back.
•
The sixth light will be on when the DVR is recording.
•
2.3 Back Panel Layout
Figure 2.2 shows the connections on the back panel of the DVR. The layout on your model could be slightly different.
4
QSD2304L DVR User's Manual
1
HDD tray
3
Menu /Number Add button
5
Manual record /Focus button
7
Play/Iris button
9
Fast Forward /Input Mode button
11
Indicator lights
13
Left /Up /Right /Down buttons
Fig2.1 Front Panel
2
Number buttons
4
PTZ /Del /Number Decrease button
6
Search /Zoom button
8
Fast Rewind /Speed button
10
Stop /ESC button
12
Enter button
14
USB interface