Live Configuration - Q-See QSD2304L User Manual

You can set DVR name. You can input the name using letters from 'a' to 'z' and numbers from '0' to '9'.
STEP1 Press "A" button to switch the inputting mode
STEP2 Modify the DVR name.
STEP3 Press "Enter" key to confirm the operation.
4. DVR ID
You can set the DVR ID. It consists of three numbers.
STEP1 Press "Up", "Down", "Left" and "Right" buttons to move the cursor.
STEP2
Press "Enter" key to modify numbers.
STEP3 Input three numbers, and press "Enter" key to confirm modifying the parameter.
STEP4 Press "OK" button to confirm the operation.
5. DATE FORMAT
There are three options to choose:
Asian Date format: YY/MM/DD.
•
European Date format: DD/MM/YY.
•
American Date format: MM/DD/YY.
•
6. TIME ADJUST
Time Adjust menu is shown in
STEP1 Press "Up", "Down", "Left" and "Right" buttons to move the cursor.
STEP2 Use the number buttons to modify time.
You also can use "+" and "-" button to modify time.
STEP3 Press "Enter" key to confirm the operation.
Notice: If time that you adjust is less than current time, the record between adjusted time and current time will be deleted automatically.
7. BUZZER ALARM
You can set the length of buzzer alarm. There are seven options to choose from: always, 5 seconds, 10 seconds, 30
seconds, 1 minute, 2 minutes and 4 minutes.

3.2.2 Live Configuration

Live Configuration menu is shown in Fig3.6 Live.
QSD2304L DVR User's Manual
. You must stop recording first to adjust time.
Fig3.5
13