Table of Contents
Advertisement
SETUP MENU
TUNING
BAND
Purpose
Allows for setting the TV channel selector (tuner) to match
your antenna or cable-TV system.
If you are having difficulty tuning channels, the TUNING
BAND may have to be set manually to match your viewing
needs,
NOTE:
TUNING BAND can only be used with ANT/
CABLE 1 or 2 Source selection.
\UTO PROGRAM
CH. ADDIDEL
CH. LABELS
TUNING BAND
1 I
AUTO TUNING
SOURCE ID
CLOCK SET
CAPTIONS
CABLE-CAW
J
Selecting Tuning Band
To Use TUNING
BAND
Press ADJUST
(ADJ) Left, q_ight to select the tuning band that
gives you the most channels:
•
BROADCAST--
is used for standard
"over-the-air"
broad-
casts.
•
CABLE
--
CATV
is used for most
standard
cable-TV
(CATV)
systems.
•
CABLE
-- HRC is used lot cable-TV
systems that use HRC
(Harmonically
Related Cartier).
•
CABLE
--
ICC is used for cable-TV
systems
using ICC
(Incremental
Coherent
C artier).
Available
Channels
per Band
The channels that are avai!,al:le in the broadcast
and cable tun-
ing bands are shown below:
BROADCAST
Band -- VHF 2 to 13, UHF 14 to 69
CATV, HRC and ICC Bands -- 1 to 125
AUTO TUNING
Purpose
Lets your TV compensate for variations in broadcast and
cable-TV frequencies.
kUTO PROGRAM
CH. ADD[DEL
CH. LABELS
TUNING SAND
AUTO TUNING
SOURCE ID
CLOCK SET
CAPTIONS
]
[
FIXED
Selecting Auto Tuning
If you are having difficulty
tuning channels,
the AUTO TUN-
ING may have to be set manually
to match your viewing
needs.
NOTE:
AUTO TUNING
can only be used with ANT/
CABLE
1 or 2 Source selec':ion.
To Use AUTO TUNING
Press ADJUST
(ADJ) Leff/]_ght
to select the mode of opera-
tion that gives you the most channels:
•
FIXED
is used to receive
"over-the-air"
TV stations,
and
. with many cable-TV
systems.
•
SEARCH
is used only when the TV must search to fred the
frequency
being received,
such as when used with certain
VCRs and video game controllers.
SOURCE
ID
Purpose
Assigns a descriptive "name" to the input sources. For exam-
ple, the VIDEO 1 source may be named VCR. "VCR" now
appears ha the source menu as a reminder that your VCR is
connected to VIDEO 1 input jacks.
To Use SOURCE ID
1.
Press
ADJUST
(ADJ)
Left/Right
to view
the
SOURCE
ID screen.
2.
Use SELECT Up/Down
to select a SOURCE.
3.
Use ADJUST
(ADJ) Left/Right
to select the desired
name for the source,
kUTOPROG!RAM
CH, ADD/DEI.
CH. LABELS
TUNING BAhD
AUTO TUNING
SOURCE ID
CLOCK SET
CAPTIONS
]
[
LABEL
Selecting Source ID
__J
(continued
on next page)
:736-o
8 -- 3
Advertisement
Table of Contents
