Contents - Yamaha RX-V1200 Owner's Manual

Check your package to make sure it has the following items.
Remote control Batteries (4)
%.... g °8 °%,.
DDD 0
[] ........
CD CD C) C)
D D_
[SB[5_[SB _
_m[liltll
(AAA, R03, UM-4)
Indoor FM antenna
(U.S.A., Canada, China and
General models)
(Australia model)
AM loop antenna
Power Cord
(U.S.A., and Canada models
only)
C
Connection Guide
Insert the batteries in the correct direction by aligning the
+ and - marks on the batteries with the polarity markings
(+ and -) inside the battery compartment.
3
• Notes on batteries
• Change the batteries periodically.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline
and manganese batteries) together. Read the packaging
carefully as these different types of batteries may have
the same shape and color.
• Changing batteries
As the batteries lose power, the operating range of the
remote control decreases and the indicator does not flash
or its light becomes dim. When you notice any of these
conditions, change all of the batteries.
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the manufacturer code and program
any acquired functions that may have been cleared.
[] Press the _ part and slide the battery
compartment cover off.
[] Insert four supplied batteries (AAA, R03, UM-
4) according to the polarity markings on the
inside of the battery compartment.
Slide the cover back until it snaps into place.
• If the batteries have leaked, dispose of them immediately.
Avoid touching the leaked material or letting it come into
contact with clothing, etc. Clean the battery compartment
thoroughly before installing new batteries.
I
3