Yamaha RX-V1200 Owner's Manual page 56

I-'l-'iIt_Plfl'
NONE
Select this if you do not have a center speaker. All of the
center channel signal are directed to the left and right
main speakers.
iH L,_.F'iiW, > '
LRG SML*ML-_ME
• 1B MAIN SP (main speaker mode)
The OSD shows large or small main speakers depending
on how you set this item.
Choices: LARGE, SMALL
Initial setting: LARGE
LARGE
Select this if you have large main speakers. The entire
range of the left and right main channel signal is directed
to the left and right main speakers.
i_; i'i_:ii'i :,F
I, L A R !:_:: E SMF:IL L
SMALL
Select this if you have small main speakers. The low-
frequency signals (90 Hz and below) of the main channel
are directed to the speakers selected with "IE LFE/BASS
OUT".
i_; i'i_:ii'i :d=
L AR :-::EI_ SMF:IL L
• When you select MAIN for "1E LFE/BASS OUT", the low-
frequency signals (90 Hz and below) of the main channel are
directed to the main speakers even if you select SMALL for the
main speaker mode.
• 1C REAR L/R SP (rear speaker
mode)
The OSD shows large, small or no rear speakers
depending on how you set this item.
Choices: LRG (large), SML (small), NONE
Initial setting: LRG
LRG
Select this if you have large left and right rear speakers or
if a rear subwoofer is connected to the rear speakers. The
entire range of the rear channel signal is directed to the
left and right rear speakers.
iL, P, ZHK L/K ::,fl'
_LRG SML MOME
SML
Select this if you have small left and right rear speakers.
The low-frequency signals (90 Hz and below) of the rear
channel are directed to the speakers selected with "IE
LFE/BASS OUT".
,kb _,_M_, L ,"_,,:,,r'
NONE
Select this if
Ill
LR!31_5M L iiOiiE
/ou do not have rear speakers.
K: REFtR L/R SP
LpEi SMLI'MOiiE
• This unit is set in the virtual CINEMA DSP mode by selecting
NONE for "IC REAR L/R SP".
54