Yamaha RX-V1200 Owner's Manual page 11

T
OUT.UT
® © ® ©
.... @@::::o@ @
@......
®
i
ACOUTLETS
I_ DIGITAL OUTPUT jacks
O Audio component jacks
Seepages ]6 and ]7 for connection information.
0 Video component jacks
See pages 14 and 15 for connection information.
I_ REMOTE IN/OUT jacks (U.S.A., Canada and
Australia models only)
See page 65 details.
I_ OUTPUT jacks
See page 18 for connection information.
1_ AC INLET (U.S.A. and Canada models only)
Use this inlet to plug in the supplied power cord.
O AC OUTLET(S)
Use these outlets to supply power to your other A/V
components (see page 19).
O DIGITAL INPUT jacks
_) 6CH INPUT jacks
See page 18 for connection information.
_) ZONE 2 OUT jacks (U.S.A., Canada and
Australia models only)
See page 65 for details.
_]D Antenna input terminals
See page 36 for connection information.
_) CONTROL OUT (U.S.A., Canada and Australia
models only)
This is a control expansion terminal for commercial use.
_) Speaker terminals
See pages 11 and 12 for connection information.
(_ IMPEDANCE SELECTOR switch
Use this switch to match the amplifier output to your
speaker impedance (see page 36). Set this unit in the
standby mode before you change the setting of this
switch.
< China and General models only >
FREQUENCY STEP switch
See page 36.
VOLTAGE SELECTOR
See page 19.
*1 As this terminal is used for an examination in the factory, do not
connect any equipment to this terminal.
9