Foxconn K8S760MG series User Manual page 61

Chapter 3 BIOS Description
Power Management Setup
Power Management Setup Menu
ACPI function (Default: Enabled)
ACPI stands for "Advanced Configuration and Power Interface". ACPI is a
standard that defines power and configuration management interfaces between
an operating system and the BIOS. In other words, it is a standard that
describes how computer components work together to manage system
hardware. In order to use this function, the ACPI specification must be supported
by the OS (for example, Windows2000 or WindowsXP). The available setting
values are: Enabled and Disabled.
ACPI Suspend Type (Default: S3(STR))
This option is used to set the energy saving mode of the ACPI function.
When you select "S1 (POS)" mode, the power will not shut off and the
supply status will remain as it is, in S1 mode the computer can be resumed
at any time. When you select "S3 (STR)" mode, the power will be cut off after
a delay period. The status of the computer before it enters STR will be saved
in memory, and the computer can quickly return to previous status when the
STR function wakes. When you select "S1 & S3" mode, the system will
automatically select the delay time.
Power Management (Default: User Define)
This option is used to set the power management scheme. Available settings
are: User Define, Min Saving and Max Saving.
Suspend Mode (Default: Disabled)
This option is used to set the idle time before the system enters into sleep
status. The setting values are Disabled and 1 Min-1 hour.
Video Off Option (Default: Susp, Stby - > Off)
This option is used to set video off option. The setting values are Always On,
Suspend -> Off, Susp,Stby - > Off, All Modes -> Off.
54
54 2004-9-14, 8:42