Table of Contents
Advertisement
S-ATA Connectors:
The S-ATA header is used to connect the S-ATA device to the motherboard.
These connectors support the thin Serial ATA cables for primary internal storage
devices. The current S-ATA interface allows up to 150 MB/s data transfer rate.
SPDIF Out Connector: SPDIF_OUT
The SPDIF out connector is capable of providing digital audio to external speak-
ers or compressed AC3 data to an external Dolby digital decoder.
24
24
Chapter 2 Installation Instructions
SATA-1, SATA-2
K8S760MG Series User Manual
GND
T X +
TX-
GND
RX-
RX+
GND
SATA-1/SATA-2
5V
1
Empty
DATA
GND
2004-9-14, 8:41
Advertisement
Table of Contents
