Table of Contents
Advertisement
Internal PCI/IDE (Default: Both)
This option is used to set the ports of onboard IDE. The available setting
values are: Disabled, Primary, Secondary and Both.
IDE Primary/Secondary Master/Slave PIO (Default: Auto)
These four items let you assign which kind of PIO (Programmer Input/Output)
is used by IDE devices. Choose "Auto" to let the system auto detect which PIO
mode is the best or select a PIO mode from 0-4
Primary/Secondary Master/Slave UItra DMA (Default: Auto)
UItra DMA technology provides faster access to IDE devices. If you install a
device that supports UItra DMA, change the appropriate items on this list to
Auto. The available setting values are: Disabled and Auto.
IDE DMA transfer access (Default: Enabled)
This option is used to enable or disable IDE DMA transfer access.
IDE Burst Mode (Default: Enabled)
This option is used to enable or disable IDE burst mode.
51
SIS Onchip IDE Device Menu
Chapter 3 BIOS Description
2004-9-14, 8:42
51
Advertisement
Table of Contents
