Foxconn K8S760MG series User Manual page 46

Halt On
This category determines whether or not the computer will stop if an error is
detected during powering up.
All Errors
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
Memory
This is a display-only category, determined by POST (Power On Self Test)
of the BIOS.
Base Memory
Extended Memory
Total Memory
39
Chapter 3 BIOS Description
Whenever the BIOS detects a nonfatal error, the
system will stop and you will be prompted.
The system boot will not stop for any errors that may
be detected.
The system boot will not stop for a keyboard error;
but it will stop for all other errors.
The system boot will not stop for a diskette error; but
it will stop for all other errors.
The system boot will not stop for a keyboard or a
disk error, but it will stop for all other errors.
The BIOS POST will determine the amount of base
(or conventional) memory installed in the system.
The BIOS determines how much extended
memory is present during the POST.
Total memory of the system.
2004-9-14, 8:41
39