Foxconn 955X7AA series User Manual page 62

Wake up by PCI card (Default: Enabled)
This option is used to set the system to wake up by PCI card. The setting
values are: Disabled and Enabled.
Wake up by Ring (Default: Enabled)
If this item is enabled, it allows the system to resume from a software
power down or power saving mode whenever there is an incoming call to
an installed fax. This function needs to be supported by the relevant
hardware and software. The setting values are: Disabled and Enabled.
Wake up On LAN (Default: Enabled)
This option is used to set the system to wake up onboard Lan 5788. The
setting values are: Disabled and Enabled.
USB KB Wake-Up From S3 (Default: Enabled)
This option is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode. The setting values are: Disabled and Enabled.
POWER ON Function (Default: BUTTON ONLY)
This option is used to set the power on function.
KB Power ON Password
This option is used to set the keyboard power on password.
Hot Key Power ON (Default: Ctrl-F1)
This option is used to set the hot key power on.
Power Management Events Menu
955X7AA Series User Manual
Chapter 3 BIOS Description
55