Foxconn 955X7AA series User Manual page 27

Front Panel Connector: FP1
This motherboard includes one connector
for connecting the front panel switch and
LED indicators (Please refer to the item 18
of motherboard layout on chapter 1).
IDE LED Connector (IDE-LED)
The connector connects to the case's IDE indicator LED indicating the activity
status of hard disks.
Reset Switch (RESET)
Attach the connector to the Reset switch on the front panel of the case and the
system will restart when the switch is pressed.
Power LED Connector (PWRLED)
Attach the connector to the power LED on the front panel of the case. The Power
LED indicates the system's status. When the system is in S0 status, the LED is
on. When the system is in S1 status, the LED is blink; When the system is in S3,
S4, S5 status, the LED is off.
Power Button Connector (PWRBTN#)
Attach the connector to the power button of the case. Pushing this switch allows
the system to be turned on and off rather than using the power supply button.
20
Chapter 2
955X7AA Series User Manual
Installation Instructions
P W R L E D P W R B T N #
+ -
2
1
+ -
NC
IDE-LED R E S E T
FP1