Foxconn 955X7AA series User Manual page 61

Chapter 3 BIOS Description
Suspend Type (Default: Stop Grant)
This option is used to set sleep mode. The setting values are Stop Grant
(saves the status of the whole system and then turns off power), and PwrOn
Suspend (CPU and core system go to low power mode, keeps power supply).
MODEM Use IRQ (Default: 3)
This option is used to set the IRQ in which the modem can use. The system
will automatically wake up when the modem receives an incoming call.
Suspend Mode (Default: Disabled)
This option is used to set the idle time before the system enters into sleep
status. The setting values are Disabled and 1 Min-1 hour.
HDD Power Down (Default: Disabled)
This option is used to turn off hard disk power if the hard disk is idle for a given
period of time. The setting values are Disabled and 1 Min-15 Min.
Soft-Off by PWR-BTTN (Default: Instant-Off)
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply.
When "Instant-Off" is selected, press the power switch to immediately turn off
power. When "Delay 4 Sec." is selected, press and hold the power button for
four seconds to turn off power.
CPU THRM-Throttling (Default: 50.0%)
This option is used to specify the CPU speed (at percentage) to slow down
the CPU when it reaches the predetermined overheat temperature. The
setting values are 75.0%, 50.0%, 25.0%.
PWRON After PWR-Fail (Default: Off)
This option is used to set what action the PC will take with the power supply
when it resumes after a sudden power failure. The available options are: Off
(remain in turn off status), On (auto power on) and Former-Sts (resume with the
previ-ous status).
Power Management Events
Press <Enter> to set the items of power management events. Please refer to
page 55.
54
955X7AA Series User Manual