Foxconn 955X7AA series User Manual page 59

Chapter 3 BIOS Description
Parallel Port Mode (Default: SPP)
This item is used to assign data transport protocols of parallel port. The
available options: SPP, EPP, ECP, ECP+EPP and Normal. Normal mode
supports data output only; ECP and EPP mode support data input and output
in bidirectional mode, but they just fit known ECP and EPP devices.
EPP Mode Select (Default: EPP1.7)
This item allows you to set the EPP Mode.
ECP Mode Use DMA (Default: 3)
Select a DMA Channel for the parallel port when using the ECP mode. This
field is configured only if Parallel Port Mode is set to ECP. The available
setting values are: 3 and 1.
52
955X7AA Series User Manual