Foxconn 955X7AA series User Manual page 33

PCI Express x1 slots
Warning:
If a performance graphics card was installed into x16 PCI
Express slot, 2X12 pin power supply was strongly recom-
mended.
Installing an expansion card
1. Before installing the expansion card, read the documentation that came with
it and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing expansion
cards.
3. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
4. Secure the card to the chassis with the screw you removed earlier.
26
Chapter 2
955X7AA Series User Manual
Installation Instructions
PCI Express x16 slot