Test Lead Alert - Fluke 175 Calibration Information Manual

International Electrical Symbols
The following international symbols appear in this document and on the Meter.
B
AC (Alternating Current)
F
DC (Direct Current)
F
AC or DC
B
Risk of danger. Important Information.
W
Refer to the manual.
X
Hazardous Voltage
Technischer
s
German certifying body.
Battery. Low Battery when shown on
b
display.
#
Verband Deutscher Electroniker. German electronics association.

Test Lead Alert

Personal injury or damage to the Meter can occur if the user attempts to make a
measurement with a lead in an incorrect terminal.
As a reminder to check that the test leads are in the correct terminals, LEAd is displayed when the Rotary
Switch is moved to or from the
Ü berwachungs Verein.
XWWarning
or position.
mA A
International Electrical Symbols
J
Earth ground
I
Fuse
P
Conforms to European Union directives
$
Conforms to relevant Canadian Standards
Association directives
T
Double insulated
Underwriters Laboratories, Inc.
!
Meter in accordance with IEC 61010-1. 54CJ
;
Conforms to relevant Australian standards
N10140
True RMS Multimeters
3