Test Lead Alert; Specifications - Fluke 175 Calibration Information Manual

175, 177, 179
Calibration Information

Test Lead Alert

To remind you to check that the test leads are in the correct terminals,  momentarily shows on the
display when you move the rotary switch to or from the mA or A position.
Attempting to make a measurement with a test lead in an incorrect terminal might
blow a fuse, damage the Product, and cause serious personal injury.

Specifications

Accuracy is specified for 1 yr after calibration, at operating temperatures of 18 C to 28 C, with relative humidity at
0 % to 90 %. Accuracy specifications take the form of: ([% of Reading] + [Counts])
Maximum voltage between any
terminal and earth ground ............................... 1000 V
 Fuse Protection for mA inputs ................... 0.44 A, 1000 V, IR 10 kA
 Fuse Protection for A input ........................ 11 A, 1000 V, IR 17 kA
Display ............................................................... Digital: 6000 counts, updates 4/sec
Bar Graph ....................................................... 33 segments, Updates 40x/sec
Frequency ....................................................... 10 000 counts
Capacitance .................................................... 1000 counts
Altitude
Operating ........................................................ 2000 m
Storage ........................................................... 12 000 m
Temperature
Operating ........................................................ 10 C to +50 C
Storage ........................................................... 40 C to +60 C
Temperature coefficient ................................... 0.1 X (specified accuracy / C, (<18 C or >28 C)
Relative Humidity .............................................. Maximum Non-condensing:
Battery Life ........................................................ Alkaline: 400 hrs typical
Size (H x W x L) ................................................. 4.3 cm x 9 cm x 18.5 cm
Weight ................................................................ 420 g
Safety
General ........................................................... IEC 61010-1: Pollution Degree 2
Measurement .................................................. IEC 61010-2-033: CAT IV 600 V, CAT III 1000 V
Electromagnetic Compatibility (EMC)
International .................................................... IEC 61326-1: Portable Electromagnetic Environment CISPR 11: Group 1, Class A,
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for
the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage
power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring
electromagnetic compatibility in other environments due to conducted and radiated disturbances.
Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The
equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.
Korea (KCC) ................................................... Class A Equipment (Industrial Broadcasting & Communication Equipment)
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take
notice of it. This equipment is intended for use in business environments and not to be used in homes.
USA (FCC) ...................................................... 47 CFR 15 subpart B. This product is considered an exempt device per clause
4
 Warning
90 % to 35 C,
75 % to 40 C,
45 % to 50 C
IEC 61326-2-2
15.103.