Table of Contents
Advertisement
Introduction
The Fluke 110 PLUS and 115 are battery-powered, true-
rms multimeters (hereafter "the Meter" or the "Product") with
a 6000-count display and a bar graph. This manual applies
to all models. All figures show the 115.
Contacting Fluke
To contact Fluke, call:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-6714-3144
Singapore +65-6799-5566
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement,
visit http://us.fluke.com/usen/support/manuals.
True-rms Multimeters
Unsafe Voltage
The hazardous voltage warning ( Y ) shows on the display
when the Meter detects a voltage ≥30 V or a voltage
overload (OL) condition. When making frequency
measurements >1 kHz, the Y symbol is unspecified.
Test Lead Alert
Personal injury or damage to the Meter can
occur if you attempt to make a measurement
with a lead in an incorrect terminal.
To remind you to check that the test leads are in the
correct terminals, is briefly displayed and an audible
beep sounds when you move the rotary switch to or
from any A (Amps) position.
XW Warning
1
Advertisement
Table of Contents
