Troy-Bilt STORM 8526 Operator's Manual page 7

5, Removethe flat washerand hairpinclip from theend
of the chute directionalcontrol
insertthe end of the chute directionalcontrolintothe
lowerbracketand securewith the flat washerand hair-
pin clipiust removed,If necessary', t he lowerbracket
can be adiusted,Refer toChute BracketAdiustment,
on Page 13,
iMPORTANT: P riorto operatingyoursnowthrower,refer
to Auger ControlTeston page 11,Readand followall
instructionscarefullyand performall adiustmentsto verify
yoursnow throweris operatingsafelyand properly,
Tire Pressure
Beforeoperating,checktire pressureand reducepres-
sure in bothtires to between15psi and 20 psi,
NOTE:If thetire pressureis not equalin bothtires,the
unit may nottravel in a straightpathand the shaveplate
may wearunevenly,
iMPORTANT
Priorto operating your
snow thrower,refer
to Auger ControlTest
on page 11. Read and
follow all instructions
carefully and pertorm
all adoustments to verify
your snow thrower is
operating safely and
properly,
\
7