Ledindications - Toshiba 55VX700U Owner's Manual

* If the router/AP doesnot supportPBCor WPS, E asy
Setup(PBC) will not work evenif the push-buttonis
pressed.
* If availablerouter/AP list is not displayed in EasySetup
(PIN)or AssistedSetup, t he powerof router/AP maybe
OFF. Check thatit is ON,andthentry re-starting thescan
for availablerouters/APs.
° Referto the router/AP instructionmanual.
NET TV or Widget problems
* If the date and time display on the NETTV menu is
wrong, turn off the TV, and turn it on again.
* NETTV or Widgets may not beavailable after turning the
TV on while the system is booting.
* NET TV and Widgets are not available if Game or PC
mode is selected on the TV.
* Content delivered by NET TV or Widgets are the
responsibility of the Contents Service Provider. Contact
the Service Provider to discuss any content issues.
Media Player problems
* Ensure that the devices (Display and Server) are
connected correctly.
* Incorrect behavior may occur when using a USB HUB
connection.
° The size of pictures stored in the DMS may be
automatically changed by the DMS and improperly
displayed. This is a result of the DMS.
° Photo files that were processed and edited by using PC's
application software may not be able to be viewed.
* When viewing content that supports two or more
formats the display may select one format automatically.
* Copyright protected contents stored in the DMS may not
be able to be played on the display.
* Content playback stability may be affected by heavy
network traffic.
* Contents originally recorded on a PC may not play
correctly.
° Setthe media sharing of the DMScorrectly, according to
the DMS instruction manual.
° Confirm that the contents of either the DMS or the USB
storage device are in formats that are supported by this
TV (_-_-_ p . 71,72, or 74).
° Depending on the DMS, access may be limited by the
MAC address. Set the server according to the DMS's
instruction manual. This TV's MAC Address can be
confirmed in the Network Setup portion of the User
Menu (_-_-p. 59).
For DLNA CERTIFIED
TM
Player
° Depending on the DMS, it may take time to display the
list.
For DLNA CERTIFIED _ Renderer
° Depending the state of this TV, DMC may not be able to
control a DMR playback.
° If DMR playback starts regardless of the user's intention,
check the access control of DMS or set Media Renderer
to Off.
LEDindications
The POWER and On Timer LED lights on the front of
the TV indicate the TV's status, as described below.
TVfront
Touch Sensor
Power
On Timer MENU T CH A
Touch Sensor (POWER LED)
° Blue
The TV is operating properly.
• No light
The power is off o1" the TV is in standby.
• Blue blinks
Fan Stopped. Turn off the TV and unplug the power
cord. Plug the power cord in again and turn on the TV.
• Red blinks
Power-On Failure. Turn off the TV and unplug the
power cord. Plug the power cord in again and turn on
the TV.
Note: To adjust the brightness of the POWER LED, see
"Adjusting POWER LED's Dimmer" (_ p. 43).
Touch Sensor (except POWER LED)
° White
Sensor is available.
On Timer LED
• Green is ON (solid)
On Timer is set.
• Green blinks (if applicable)
Abnormal operation of BUS line. Turn off the TV and
unplug the power cord. Plug the power cord in again
and turn on the TV.
After trying the solutions, if the problem persists:
° In the U.S., visit TACP Consumer Solutions on the
web at www.tacp.toshiba.com/customersupport/
or call 1-800-631-3811.
° In Canada, locate the nearest Toshiba authorized
service depot by directing your web browser to
www.toshiba.ca; click "Home Entertainment," and
then click "Support."
78