Toshiba 55VX700U Owner's Manual page 39

REGZA-LINK ® Player Control menu functions:
1
Press _ to open the Quick menu.
2
Select REGZA-LINK Player Control. Press _.
3
Press • o1"• to select the item you want to control
and press (3.
Power Turns the selected device on and off.
Root Menu Accesses the selected device's top menu.
Contents Accesses the contents list when you press
Menu _.
Setup
Menu Accesses the DVD player's setup menu.
Accesses the DVD's top menu during
Top Menu playback.
DVD
Menu Accesses the DVD's menu during playback.
Note:
• These functions depend on the connected devices.
• The REGZA-LINK Player Control item is not available
under these conditions:
- A non-HDMI input is selected.
- The Enable REGZA-LINK item is set to Off.
- The connected REGZA-LINK device is not a playback
or recording device.
REGZA-LINK® inputsourceselection
If a REGZA-LINK ® device with HDMI switching
capability (e.g. an amplifier) is connected to the HDMI
input, you can select another REGZA-LINK ® device
that is connected to the master HDMI device.
Use _) on the remote control or the control panel (_#r'
p. 33).
Adjustingthe amplifier'saudio
Using the TV's remote control, you can adjust or mute
the sound volume of your amplifier. First, set the
MODE SELECT switch on the remote control to TV.
• _ _-_ adjust the volume level.
• d_ ,__: turns off the sound.
1 _ > PREFERENCES > REGZA-LINK Setup >
_b.
2 Press • or • to highlight Speaker Preference.
3 Press < or • to select Amplifier.
Note: Confirm that a connected REGZA-LINK ® device
(such as DVD player, etc.) is selected for the Amplifier
input source.
Note:
• You can also use this function when the amplifier is
connected to the TV'S DIGITAL AUDIO OUT terminal
(not HDMI connection). Select a digital audio input mode
on the amplifier.
° These functions depend on the device connected.
OtherREGZA-LINK ® functions
When
Enable REGZA-LINK
and all items in the
REGZA-LINK Setup menu are set to On, the following
functions will be enabled.
TV Auto If a REGZA-LINK ®device is turned on,
Power the TV turns on automatically.
If the TV is turned off, the TV will send a
Auto Standby message to turn off all of the REGZA-
LINK devices connected to the TV.
If Amplifier Control is set to On, you can
Amplifier adjust the sound volume or turn off the
Control
sound using the remote control.
Speaker
Preference
From this item, you can set your audio
output preference to the TV speakers or
the amplifier. When this item is set to
Am plifier, the remote control can be used
to adjust or mute the volume of the
audio. This item will be not available and
set to TV Speakers automatically unless
a REGZA-LINK ®compatible audio
receiver is corulected.
Note: When you turn on the amplifier, change its input
source, or adjust the sound volume, the sound will be
output from the amplifier's speakers even if "IV Speakers
has been selected. Turn the TV off and on again to output
the sound from the TV speakers.
39