Toshiba 55VX700U Owner's Manual page 48

Adjusting the picture
Selectingthe picturemode
You can select your desired picture settings from the
following modes, as described below.
Automatically adjusts picture settings
AutoViev,/_' based on ambient light conditions and
input signal content.
Sports Bright and dynamic picture.
Standard Standard picture settings.
Movie 1
Lower contrast for darkened room.
Movie 2
Designed for playing a video game
Game requiring split-second timing between
the screen display and input from the
controller.
PC Designed for viewing of PC tables and
documents.
Note:
• PC mode is available for HDMI and PC inputs only (not
displayed for other input sources).
° Game mode cannot be turned on when theANT/CABLE
input is selected.
1 _
> PICTURE > Picture Mode.
2
Press
_ or •
to select a mode. Press [_.
Note: The picture mode you select affects the current
input only. You can select a different picture mode for each
inpuL
Adjustingthe picturequality
The picture quality you adjusted under the picture
mode is saved to the picture mode of same name.
Backlight* darker lighter
Contrast lower higher
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
* Backlight: Adjusts the brightness of the entire screen. When
in video mode and no signal is input, this selection is set to O,
(Settings are stored in memory.)
Note: Some menus cannot be adjusted in any of the
following cases.
• AutoView is selected.
• TheaterLock is set to On.
To adjust the picture quality:
1 _
> PICTURE > the setting you would like to
adjust (Backlight, Contrast, Brightness, Color,
Tint, or Sharpness).
2
Press
_ or •
to adjust the setting. Press [_.
Note: The picture setting that you adjusted affects the
current input only. You can adjust the picture quality
separately for each input.
To reset to the factory defaults:
1 Select the picture mode you want to reset.
2
> PICTURE > Reset > _9. A confirmation
screen appears.
3 Press < or • to select Yes. Press '_,_2).
48