Toshiba 55VX700U Owner's Manual page 44

Displaying TV status information
To display TV status information:
Press {,._o).
The following information will display (if applicable):
• Current input (ANT/CABLE, Video, etc.)
° If ANT/CABLE is the current input, either "CABLE"
(for cable TV) or "ANT" (for over-the-air broadcasts).
° Channel number (if in ANT/CABLE mode)
° Input label (if set)
° Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signal only)
° Stereo, Mono or SAP audio status (when HDMI input
mode, PCM)
° Video resolution
° Aspect ratio of incoming video signal (4:3 or 16:9)
° V-Chip rating status
° GameTimer (if set)
To close the screen:
Press _ again.
The following additional information (only available
for ANT/CABLE input) will display for off air digital
channels (if applicable):
° Title
° Duration
° Detailed description
To display next program information for digital
channels, press _ again. Pressing i,_o) a third time will
remove the entire banner.
Note: The location of the banner can be moved to the top
or bottom of the screen by pressing • or • while the INFO
display is onscreen. The last position will be stored to
memory.
Viewingsupportinformation
1 _
> SETUP > System Information.
2 Press _ to display support information containing
Web/Customer service numbers for US, Canada
and Mexico.
Resetting to Factory Defaults
You can reset all settings and channels.
Note: By upgrading, the factory default values may be
changed.
1 _
> SETUP > Reset W > '_9.
2
Enter your PIN code (if PIN code has been set).
3 A confirmation screen appears. Select Yes, and
press _. The TV will turn off automatically.
To cancel the reset:
Press _ or • to select No. Press _o_.
Powerfailure
If the power is cut off while you are viewing the TV,
the Last Mod e Memory feature automatically turns on
the TV when the power is restored.
44