Setting Up The Network; Wirelesssetup - Toshiba 55VX700U Owner's Manual

Setting up the Network
You can select the Network Type.
1 _
> PREFERENCES > Network Setup > _.
2
Press • or • to highlight Network Type.
3 Press _ or • to select Wired or Wireless.
4 If you select Wired, see "Advanced Network Setup"
(_ p. 58).
If you select Wireless, see the next section.
WirelessSetup
Note:
• Continued connection to AP (Access Point) is not
guaranteed. The connection may be lost while watching
TV.
There are 3 methods for wireless setup:
• Easy Setup (WPS)
If AP supports WPS, this can be used.
- WPS is a standard designed to execute connection of
wireless LAN equipment and setup of security easily.
WPS will automatically configure all wireless settings.
• Assisted Setup (setup by using AP's notification
information)
Network Name, Authentication, and Encryption are
decided based on information from AP. You manually
set the Security Key.
° Manual Setup (to input all settings)
EasySetup usingPBC(Push Button Configuration)
1 %
> PREFERENCES > Network Setup > _.
2
Press • or • to select Wireless Setup. Press _.
3 Press • o1"• to select Easy Setup. Press ',_,_.
4
Press < or • to select PBC.
5 Press • to select Start Scan. Press (t,).
6 Following the onscreen instruction, push the
appropriate button on your AP.
7 When a screen reporting that the setup succeeded
appears, press _.
To cancel searching for the AP:
Press _ while searching for the AP. A message will
appear. Press < or • to select Yes. Press _.
EasySetup usingPIN (PersonalIdentification
Number)
1 %
> PREFERENCES > Network Setup > _.
2
Press • or • to select Wireless Setup. Press _.
3 Press • or • to select Easy Setup. Press (3.
4 Press < or • to select PIN.
5 Press • to select Start Scan. Press '_L_).
6 Scan screen appears. Enter the PIN displayed on
this screen into your PC or AP.
7 Press • or • to select the desired AP. Press _.
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
8
When a screen reporting that the setup succeeded
appears, press
(o_).
To cancel searching for the AP:
Press _ while searching for the AP. A message will
appear. Press < or • to select Yes. Press _.
AssistedSetup
1 _
> PREFERENCES > Network Setup > _.
2
Press • or • to select Wireless Setup. Press _.
3 Press • or • to select Assisted Setup. Press _.
4
Press • or • to select the desired AP. Press 9.
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
5 Select Security Key. Press _. The Software
Keyboard appears.
6 Input the Security Key by using the Software
Keyboard (_#r' p. 60). To save your setting, press the
BLUE button.
Note: The Security Key must adhere to these
conditions:
-TKIP/AES: 8-63 ASCII or 64 Hex characters
-WEP: 5 or 13 ASCII or 10 or 26 Hex characters
7
Press • or • to highlight Key ID. Press _
or •
to
select 1, 2, 3 or 4.
Note: When Encryption is set to WEP, this option is
available.
8 Select Done. Press _).
Note: If Network Name is not displayed, see step 4
and 5 in Manual Setup (_,_ in the next section) to set
Network Name before pressing Done.
Note: Settings are not saved if _ is pressed before
Done is selected.
56