Toshiba 55VX700U Owner's Manual page 26

7
Start Scan
Press _.
Note: If you want to stop scanning, press [_ while
scanning.
• After scanning completes, a channel list screen
(such as the one below) appears.
If channels are not found after scanning:
° Check the antenna/cable connections, and scan again.
° Connect the TV to the antenna or cable box directly
and scan again.
1 _
> SETUP > Quick Setup > _.
2
A confirmation message appears. Press _
or •
to
select Yes. Press _.
3 Set up to step 6.
° If you selected Antenna in the previous setting,
select Cable.
° If you selected Cable in the previous setting,
select Antenna.
4
Scan again.
° Refer to information on www.tacp.toshiba.com/
customersupport.
Navigatingthe menusystem
° To open the main menu, press _ on the remote
control or TV control panel.
° Press A, V, ,i or • on the remote control or TV control
panel to navigate and make selections.
° To select a menu option, press @. To return to the
previous menu page, press _.
° To close a menu instantly, press _ or _.
° All menus will close automatically if you do not make
a selection within 60 seconds.
26