Toshiba 55VX700U Owner's Manual page 30

Labeling video inputs
The input labels are shown in the input selector, and in
the Channel Browser and banner displays. You can
label video inputs according to the devices you have
connected to the TV.
1 _
> PREFERENCES > AV Connection > (o_.
2
Press • or • to select Input Labeling. Press _.
3 Press • or • to select the item you want to label.
Press _ or • to select --, Amplifier, Cable, DVD,
Game, PC, Recorder, Satellite or VCR, or press
the GREEN button to select User Input.
Note: When User Input is selected by pressing the
GREEN button, the Software Keyboard window will
appear. Input the desired characters (10 characters
or fewer) by using the Software Keyboard (_,_ p. 60) or
using the number buttons for a number inpuL To save
your settings, press the BLUE button.
4
Repeat step 3 for other video inputs.
Configuring sharedinputs
Rear SharedAudio
1 _
> PREFERENCES > AV Connection > _.
2
Press • or • to select Rear Shared Audio.
3 Press< or • to select ColorStream HD1, Video 1,
o1" HDMI 3.
Side SharedAudio
1 _
> PREFERENCES > AV Connection > _.
2
Press• or • to select Side Shared Audio.
3 Press_
or •
to select PC (ColorStream HD2) or
HDMI 4.
Shared PCInput
1 _
> PREFERENCES > AV Connection > _.
2
Press • or • to select Shared PC Input.
3 Press _
or •
to select PC or ColorStream HD2.
Settingthe AutoInputfeature
You can change TV inputs using the MODE SELECT
buttons on the remote control: TV, CABLE/SAT, BD,
DVD, VCR/PVR, AUX. After setting an input for a
specific MODE SELECT button, the TV automatically
switches to the input when you press and hold the
MODE SELECT button for 2 seconds and release it.
Auto Input settings options for each MODE SELECT
button:
TV ANT/CABLE
ANT/CABLE, Video 1, Video 2,
CABLE/SAT ColorStream HD1, HDMI 1, HDMI 2,
HDMI 3, HDMI 4, PC (ColorStream
HD2)
Video 1, Video 2, ColorStream HD1,
BD HDMI 1, HDMI 2, HDMI 3, HDMI 4,
PC (ColorStream HD2)
Video 1, Video 2, ColorStream HD1,
DVD HDMI 1, HDMI 2, HDMI 3, HDMI 4,
PC (ColorStream HD2)
ANT/CABLE, Video 1, Video 2,
VCR/PVR ColorStrealn HD1, HDMI 1, HDMI 2,
HDMI 3, HDMI 4, PC (ColorStream
HD2)
Video 1, Video 2, ColorStream HD1,
AUX HDMI 1, HDMI 2, HDMI 3, HDMI 4,
PC (ColorStream HD2)
Note: The TV mode select button will be restricted to the
ANT/CABLE input.
To set Auto Input:
1
> PREFERENCES > Auto Input > _o_
2
Set Enable Auto Input to On.
3
Press • or • to select the mode you want to set.
4 Press _ or • to select an input source for that mode.
5 Repeat the procedure for other modes.
To turn off Auto Input:
Select Off in step 2.
To reset Auto Input:
Select Reset. Press _.
3O