Oven; The Racks - Thermador CM301 Care And Use Manual

Oven Features Builtqn CHOven Care andUseHanual
Oven
GENERAL
TIPS
, Placing racks in oven: To insert racks into the oven,
hold the rack with the back rail up and toward the
back. Place the safety hooks under the front of the
rail guides. Push the rack into the oven, lifting the
rack stops over the front of the rail guides. Slide the
rack into position.
Removing racks from oven: To remove racks or
reposition racks in the oven, pull the rack toward the
front of the oven. Lift up the front of the rack over
the safety stops and pull from the oven.
Place oven racks in desired positions before turning
the oven on.
Oven rack supports should not be removed from the
oven,
, _I, CAUTION! Never use aluminum foil to cover the
oven racks or to line the oven. It can cause damage
to the oven if heat is trapped under the foil.
, When placing food on a rack, pull the rack out to the
stop position. The racks are designed to lock and not
tilt when pulled forward.
SELF CLEANING THE RACKS
, If the racks are left in the oven during Self Clean, the
racks will lose the shiny finish, See Oven Care and
Cleaning Recommendations on Page 51,
Always
remove
before
Self Clean
Extendable Rack
, The Extendable Rack (some models) must be removed
before starting the Self Clean mode.
Racks
I
--4
3
!
Rack
Positions
RACK POSITIONS
, Rack positions are numbered from the bottom support
guide (#1) to the top (#6), The correct rack position
for cooking a food item depends on the recipe and
the cooking mode,
, Refer to the cooking recommendations in this manual
for suggested rack positions,
MULTIPLE RACK COOKING AND BAKING
, Now you can cook a complete meal using multiple
racks without flavor exchange from different foods.
, Check that cooking or baking temperatures are the
same when cooking different foods at the same time.
, Two racks can be used at one time during BAKE mode,
such as when baking a batch of cookies.
, Three racks or more can be used with convection
modes.
!4