E V E R F O C U S
E L E C T R O N I C S
Back Panel Connections
Video In
POWER
1
Main Power plug: Connect the DC12~24V power source to Adapter for AC100~240V.
AUDIO
2
Audio IN: Audio input for recording.
Audio OUT: Audio output can be set to "ON" or "OFF" in Setup Menu.
OFF / Mute
Playback Audio
Audio IN
Operation of SW1:
When in recording or standby mode, the out of
SW1 is connected to Audio IN.
When in playback mode the out of SW1 is
connected to SW2 Audio.
When Audio Out is enabled and machine is in Recording or Standby mode, the Audio IN is loop-
through to Audio Out connector. When Audio Out is enabled and machine is in Playback mode then the
Audio Out playback audio.
C O R P O R A T I O N
10
3
5
2
4
SW2
A
5
8
1
6
7
9
( Internal circuit )
SW1
Audio OUT
Operation of SW2:
When Playback Audio is enabled then the output of SW2
will be connected to Playback Audio.
When Playback Audio is disabled then there is no
audio output (MUTE).