Table of Contents
Advertisement
3. Back Panel Connections
1
3
2
4
POWER
Power Switch: Switch ON/ OFF the main power.
1
Main Power plug: The main power input.
2
AUDIO
Audio IN 1, 2 : Audio input for recording.
3
Audio OUT 1, 2 : These two audio outputs can be set to "Enable" or "Disable" in Setup Menu.
4
Audio IN
Operation of SW1 :
When in recording or standby mode, the out of
SW1 is connected to Audio IN.
When in playback mode the out of SW1 is
connected to SW2 Audio.
When Audio Out is enabled and machine is in Recording or Standby mode, the Audio IN is loop-through to Audio Out
connector.
When Audio Out is enabled and machine is in Playback mode then the Audio Out playback audio.
Back Panel Connections
5
7
8
12
6
9
10
11
The operation of audio out is as follows:
SW2
OFF / Mute
Playback Audio
16
14
13
( Internal circuit )
SW1
A
Operation of SW2 :
When Playback Audio is enabled then the output
of SW2
will be connected to Playback Audio.
When Playback Audio is disabled then there is no
audio output (MUTE).
6
15
Audio OUT
Advertisement
Table of Contents
