Timer Recording Setup - EverFocus EDSR400H Instruction Manual

E V E R F O C U S E L E C T R O N I C S
To stop recording simply press the Stop button.
Please Note: When the Hard Drive is full, the DVR will
recording automatically or overwrite from the beginning of the
This is all dependent on what was s
page 19).

Timer Recording Setup

Assuming you have completed the setup options in Chapter 1 and 2. Log into
the DVR menu by pressing the Menu button.
Turning the jog dial clockwise or counter clockwise will allow
you to scroll through the different menu setup option pages.
Use the jog dial after completing the previous step and go to Timer Record
Setting menu ( See Page 17). Setup a timer for your application and exit the
menu by press ing the Menu button. Once you have exited the menu the DVR
will go into record mode.
To view the operating display (diagram 19), press the Display button.
To stop recording simply press the Stop button and it will take you to timer
menu, turn all sets to off and exit menu by pressing menu to stop recording.
Please Note: When the Hard Drive is full, the DVR will either stop
recording automatically or overwrite from the beginning of the hard drive.
This is all dependent on what was set in the normal record setting (see
page 19).
C O R P O R A T I O N
Diagram 18
et in the normal record setting (see
Diagram 19
42
either stop
hard drive.