How To Upgrade Firmware; Chapter - EverFocus EDSR400H Instruction Manual

E V E R F O C U S E L E C T R O N I C S
How to Upgrade Firmware on the
DVR?
This chapter will try to give you a detailed instruction on how to up
the DVR. This will be a helpful in com
Please go to ftp://208.50.31.200
folder. Then click on the folder that repre
of your DVR.
Copy the .HEX to CF card using the Compact Flash reader that came
with your DVR (from a computer).
Please Note: Lexar Compact Flash Cards are not compatible with Ev
digital recorders. Everfocus suggests using Sandisk or Kingston Compact
Flash Cards.
Insert the Sandisk or Kingston Compact Flash Cards into the Compact
Flash card slot on the front panel of
Flash card, make sure the dire
If you are in Record mode hit the stop button to stop recording.
If the menu pops up when you press the stop button. This usually means
you have either the DVR is in Timer record or Motion record. Log into the
DVR menu by pressing the Menu button. Go to Either Timer Setting Menu
or Motion Record Setting menu and turn them off and exit menu by
pressing menu to stop recording.
Once you have stopped any type of recording on the DVR you are ready to
upgrade.
Press the menu button and use the Jog Dial to go to System menu (See
page 39).
Using the CH1 and CH2 button to navigate in the menu. Highlight
System Upgrade turn NO to YES (use CH3 or CH4).
C O R P O R A T I O N
pleting the upgrading process.
and go to DVR Firmware upgrad
sents you're the model number
the DVR. When inserting the Compact
ction of insertion is correct.
55

Chapter

8
grade
e
erfocus