Playback Overview; Basic Playback - EverFocus EDSR400H Instruction Manual

E V E R F O C U S E L E C T R O N I C S

Playback Overview

Before continuing please be sure to have reviewed DVR Menu Setup (Chapter 3). You
a re now ready to begin setting up the machine for playback. This chapter will show you
how to setup the recorder for basic playback.
B asic Playback
Assuming you have completed the setup options in Chapter 1 through 4. If
you are in Record mode hit the stop button to stop recording.
If the menu pops up when you press the stop button. This usually means you
have either the DVR is in Timer record or Motion record. Log into the DVR
menu by pressing the Menu button. Go to Either Timer Setting Menu or
Motion Record Setting menu and turn them off and exit menu by pressing
menu to stop recording.
Once you have stopped any type of recording on the DVR you are ready to do
playback.
Pressing the play button will set the recorder into playback mode and play the
last segment recorded.
If you Press the Rev play button it will play the last known segment in reverse
mode.
At any point if you wish to fast forward or rewind while playing back simply
use the shuttle dial to do so. The speed will be shown on the corner of the
screen. << Or >> 2, 4, 6, 8, 16, 32, 600X.
If you want to do a slow playback press the pause button anytime during
playback. Then simply turn the shuttle clockwise or counter clockwise
depending if you want to do a slow forward or slow rewind. The speed will be
shown on the corner of the screen. << Or >> 1/2, 1/4, 1/6, 1/8, 1/16, 1/32.
If you want to go frame by frame while playing something back. Press the
pause button and use the jog dial to advance to the next image. Turning the jog
dial counter clockwise will go to the previous still image.
C O R P O R A T I O N
46
Chapter
5