Back Panel Connections - EverFocus EDSR400H Instruction Manual

3. Back Panel Connections

POWER
Main Power plug: Connect the DC12~24V power source to Adapter for AC100~240V.
1
AUDIO
Audio IN : Audio input for recording.
2
Audio OUT : Audio output can be set to "ON" or "OFF" in Setup Menu.
Audio IN
Operation of SW1 :
When in recording or standby mode,
the out of SW1 is connected to Audio IN.
When in playback mode the out of SW1 is
connected to SW2 Audio.
When Audio Out is enabled and machine is in Recording or Standby mode, the Audio IN is loop-through to Audio Out
connector.
When Audio Out is enabled and machine is in Playback mode then the Audio Out playback audio.
10
3
5
2
4
SW2
OFF / Mute
Playback Audio
8
1
6
7 9
( Internal circuit )
SW1
A
Operation of SW2 :
When Playback Audio is enabled then the output
of SW2 will be connected to Playback Audio.
When Playback Audio is disabled then there is no
audio output (MUTE).
Audio OUT