Rs232/Rs485 Setting Menu - EverFocus EDSR400H Instruction Manual

E V E R F O C U S E L E C T R O N I C S
RS23 2/RS485 Setting Menu
D iagram twelve is a screen shot of the RS232/RS485 Setting Menu. This menu is for
se tting up a connection from the digital recorder to a computer to transfer instructions
o r information using the HyperTerminal program in Windows. In the RS232/RS485
S etting Menu the following fields are defined as follows:
R S232:
RS232 Baud Rate: This field is to set the speed at which is used to transmit
instruction or information through the RS232 port on the DVR. There are
six different speeds, 1200 BPS, 2400 BPS, 4800 BPS, 9600 BPS, 19200
BPS, and 3840 BPS. The default setting from the factory is 9600 BPS. To
change this, simply use the arrow keys on the DVR which also represent
the CH1, CH2, CH3 and CH4 keys (These are the top four left buttons).
Use the up and down arrow keys to make your selection.
RS232 Stop Bit: This fi
There are two different
1. To change this, simply use the arrow keys on the DVR which also
represent the CH1, CH
buttons). Use the up an
C O R P O R A T I O N
Diagram 12
eld is to set the stop bit for the RS232 connection.
stop bits, 1 or 2. The default in the
2, CH3 and CH4 keys (These are the top four left
d down arrow keys to make
32
DVR is set to
your selection.