Section 5: Accessories - Grizzly EXTREME G9860 Owner's Manual

aCCEssoriEs

SEcTION 5: accESSORIES

h9815—power Twist
®
smooth running with less vibration and noise
than solid belts. the power twist
be customized in minutes to any size—just add
or remove sections to fit your needs. size:
48"; replaces all "a" sized V-belts. requires two
power twist V-belts to replace the stock V-belt
®
on Models g9953, g9953zX, and g9953zXF.
Figure 46. h9815 power twist
h7319—carbide Indexable Insert, 10 pk.
these indexable carbide inserts can be rotated to
provide four factory sharp edges before replace-
ment. 14mm x 14mm x 2mm.
Figure 47. Carbide indexable insert for the spiral
cutterheads.
Extreme series Jointer (Mfg. since 9/11)
v-belt - ⁄ " x 48"
1
2
V-belt can
®
⁄ " x
1
2
V-Belt.
®
h7288—12" Dispoz-a-blade
(Includes 4 holders & Knife Inserts)
h5143—12" cobalt Dispoz-a-blade
Inserts (Set of 4)
h2253—16" Dispoz-a-blade
(Includes 4 holders & Knife Inserts)
h2267—16" cobalt Dispoz-a-blade
Inserts (Set of 4)
install a dispoz-a-Blade
new jointer and save up to 70% on knife replace-
ments for the life of your jointer. Each knife insert
is double-edged, so you get two knives in one,
and is indexed so that all knife inserts can be
installed at the same height in just minutes. yes,
that means you can throw away the knife jig!
Figure 48. dispoz-a-Blade
G4181—power Feeder, 1 hp Single-phase
G7873—power Feeder, 1 hp 3-phase
these industrial power feeders feature 4 speeds
forward or reverse, X y z adjustable, and three
synthetic rubber rollers. 220V.
Figure 49. 1 hp power Feeder.
System
®
Knife
®
System
®
Knife
®
Knife system in your
®
holder and Knife.
®
-31-