Section 2: Power Supply - Grizzly EXTREME G9860 Owner's Manual

SEcTION 2: pOWER SuppLy

availability
Electrocution,
equipment damage may
occur if machine is not
correctly grounded and
connected to the power
supply.
Full-Load current Rating
Extreme series Jointer (Mfg. since 9/11)
circuit Information
For your own safety and protection of
property, consult a qualified electrician if
fire, or
you are unsure about wiring practices or
electrical codes in your area.
Note: The circuit requirements listed in this man-
ual apply to a dedicated circuit—where only one
machine will be running at a time. If this machine
will be connected to a shared circuit where mul-
tiple machines will be running at the same time,
consult a qualified electrician to ensure that the
circuit is properly sized for safe operation.
circuit Requirements for G9860/
G9860ZX
Full-Load current Rating ................... 16 amps
Nominal voltage .............................. 220v/240v
cycle ..........................................................60 hz
phase .................................................... 1-phase
circuit Rating ...................................... 20 amps
plug/Receptacle ............................. NEMa 6-20
cord .........3-Wire, 12 aWG, 300vac, "S"-Type
G9860 &
G9860ZX
6-20 PLUG
Figure 3. typical 6-20 plug and receptacle.
GROUNDED
6-20 RECEPTACLE
-9-