Adjusting
the image during recording
Focus
does
r
]I
aQj
.ISI
automatlcall/
The
_mage appears
ice
Dngnt,
[llcKers.
or cnanges
color.
mage
s COlOr balance
is not natural,
A subject
passing
qUJCK{y tnrougn
the frame
appears
cIistortec1
• Set "Focus"
to "Auto."
".page 70
• The recording conditions are not suitable for auto focus. Adjust the
focus manually. _page
70
• The lens is dusty on the surface. Clear the lens and check the
focus.
•
Recording is being made in a dark location.
Use a light to brighten the area.
This may occur when you make a recording under a fluorescent
sedium, or mercury lamp.
Cancel 'qSCENE" to avoid or minimize this phenomenon.
"-.page 61
White balance adjustment
is required. Adjust to the proper "White
Balance."
"page
64
This is called the focal plane phenomenon.
This is not a
malfunction. Because of the way the itr_age device (CMOS sensor)
reads out video signals, a subject passing through a frame rapidly
may appear to bend. depending on the recording conditions.
PLayback on your camcorder
Playback (play/pause)
func:tion d oes " Image
rues recorded
using another device may not play on your
camcorder.
not work.
• Check memory card compatibility.
",page 33
Photo images stored on a storage
media are not displayed in the
actual size.
playback is interrupted
• Check if the AC power adaptor or battery back is properly
unexpectedly_
connected
and secure.
•
Photo images recorded on other devices may not appear in their
actual size. This is not an error.
145