| To receive videos/photos
from another camcorder
1. Touch the Network (D)
' "Device to Device."
2. Touch "Receive."
•
Search for the target camcorder.
•
If the target camcorder is not displayed in the search list,
touch the Refresh (_) tab to search again.
3. Touch the target camcorder in the search list.
4. Enter the password and touch the (_)
tab.
•
This password is displayed on the screen of the camcorder
that will be sending videos or photos. Copy it from there.
•
The camcorder starts transferring videos or photos.
5. To end the "Device to Device" transfer, touch the Return (_)
tab.
• The device-to-device
transfer uses wireless ad--hoc corrlmunication,
• If your camcorder
was used as a receiver, you must cancel the connection
bdere you carl use it as
a sender, R) cancel the connection,
touch the Return tab,
• The network conrlection
range between the camcorders
may differ depending on the wireless ad--
hoc network condkions,
• If the connection between your camcorder
and the other camcorder
is terminated abnormally,
your camcorder
considers itself still connected and only indicates the disconnection
after a certain
amount of time,
• Depending on the wireless adhoc
network's
conditions and the photo or video file sizes, it may
take a while to send or receive videos or photos,
• You can send or receive only those videos and photos that were recorded by the camcorder,
• You cannot enable this function if there are no recorded videos or photos in your camcorder,
• Device--to-device
transfer is available only between Samsung products (camcorder,
digital camera,
etc,) that haw_ the Device to Device transfer function,
121