w re
networ!<
oonfaur t on
oonneoton
MANUAL
NETWORK
CONNECTION
By typing in the IP address, you can connect to a network via an AP (access point) in the
wireless network service area.
PREC_ECK!
Select the record (,_/_'l)
mode by pressing the MODE button. ",page 27
1. Touch the Network (D)
' "Settings .... "Access Point Setting"
the desired AP's icon (
) _ "lP Setting .... "Manual."
•
The IP setup screen appears.
•
If you select a WPS AP, touch the WPS PIN tab on the bottom
of the LCD screen, and then enter the generated PIN number in
the AP device within 2 minutes.
2. Touch each item and enter the required value by using the virtual
keyboard.
, IP: Providethe IP address,
, Subnet Mask: Providethe subnet mask.
° Gateway: Providethe gateway.
• DNS Server: Providethe DNS address,
3. When done, touch the (_) tab.
•
The camcorder connects to the network via the selected AP.
•
For more information about the network settings, contact the network administrator
or the service
provider.
• The network settings may differ, depending on network conditions.
•
Do not try to connect to a network that you have no permission to access.
•
Use a fully charged battery while you are using network services.