Remote
You can set the camcorder to operate with the supplied remote control.
1. Touch the Menu (_) tab _ Connectivity setting ( % ) _ "Remote."
2. Touch the desired submenu item.
3. To exit the menu, touch the Return (_)
tab.
off: The remole control carl not operate the camcorder,
• On: The remote control can operate the camcorder,
PC Software
If you set PC Software to On, you can use the built-in video and photo management software
by connecting the USB cable between the camcorder and your PC. With this software, you can
download stored video and photo images from the camcorder to your PC's hard disk and edit
the video and photo files right on your PC's screen.
1. Touch the Menu (_) tab _ Connectivity setting ( % )
"PC Software."
2. Touch the desired submenu item.
3. To exit the menu, touch the Return (_)
tab.
,
Off : Disables the function.
• On : The bulk-in edking software launches when the camcorder
is
connected to the PC.
• The PC Software
function
is not available
in the following
condition:
If "USB Connect"
is set to "PictBndge"
• To enable the PC Software function, set "USB Connect"
to "Mass Storage,"
in the system setting
menu option. _page 94
• The PC Software is compatible with the Windows OS's only.
93
m