Samsung LN-S3252D Owner's Instructions Manual page 40

Setting up the TV with your PC
How to Auto Adiust
Use tile Auto Adjust limction to have the TV set automatically adjust the video signals the monitor receives.
The function also automatically fine tunes the settings and adjusts the frequency values and positions.
:_ This function does not work in DVI Digital mode.
1. Press the MENU button to display the menu.
Press the ..- or v buttons to select "Setup", then press the ENTER_ button.
Press the A or v buttons to select "PC", then press the ENTER_ button,
Change to the PC mode first,
2. Press the A or _ buttons to select "Auto Adjustment", then press the ENTER_ button,
Press the EXIT button to exit,
Adjusting the Screen Ouality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone_
then do the lYequency adjustments to the utmost and fine tune again. Alie]" the noise has been reduced, ]'c-adjust the pictm'e so that
it is aligned on the center of the screen.
1. Press the MENU button to display the menu,
Press the _ or _ buttons to select "Setup", then press the ENTER_ button,
Press the _ or _ buttons to select "PC", then press the ENTER_ button,
Changeto the PC modefirst,
_', Press the ENTER_ button to select "Image Lock".
3, Press the ..- or _ buttons to select "Coarse" or "Fine", then press the ENTER_ button.
Press the _ or _. buttons to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry,
Press the ENTER_ button,
Press the EXIT button to exit.
English-38