Identifying Problems - Samsung LN-S3252D Owner's Instructions Manual

Appendix
Identifying Problems
if the TV seems to have a problem firs1 try this tisl of possible problems and solutions.
if none of lhese troubleshooting tips apply, call your nearest Samsung service cenler.
Problem
Poor ptCIllre
Poor SOUlldquality,
No picture or sound.
No sound or sound is toc low at
lllaXilllUlll votu I_1C.
Picture rolls vertically,
The TV operates en'aticaliy.
The TV won't turn o11.
Remote control malfunctionb
"'Check signal cable" me..oge.
"Not Supported Mode" nles_,ag_:.
Digital broadcasting screen
problem
The inlage ts too light or too dark.
Horizontal bars appear to flicker,
itter or shimmer on the ima=e.
M:rtical bars appear to flicker,
itter or shimmer ill] the ima_c.
8crc_n is black and I'--Jwer
ndicator hght blinks steadily.
lmage is not stable and may appear
m vibrate whell yoti nave a
eolnptI[er connected to the PC npllL
Possible Soluthm
Try another channe
Adjust the antenna.
Check all wire connections
Try another channe
Adjust the antenna.
Try another channe
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connection_
First cht:ck the volume of units connected tu your TV (digital broadcasting receiver, DVD, cabtc
broadcasting receiver, VCR, etc.). Then, adjust the TV vohune accordingly.
Check all wire connections
Unplug the TV for 30 seconds, then try operating it again.
Make sure the walt outlet is working.
Replace the remote cuntrol batteries
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
En_ure that the signal cable is firmly connected to the PC source.
Check the maximum resolution and the fi'cqucncy of the Video Adapter.
Compare these values with the data in the Display Modes.
Please check the digital signal strength and input antenna.
Adjust the Brighmess and Contrast.
Adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine tuning.
(;n your computer check: Power. Signal Cable.
The TV is using its power management _ystem.
Move the comput_'r's mouse or press any key on the kcybom_l
If the setting is not correct, use your computer utility program tu change the displa_ settings.
Your TV supports multiscan display _mctions within the _hlh_wing fi'equency domain:
tlorizmltal frequency (kHz_ 30~60
Vertical fi'equenc_ (tlz) 60-75
PC Maximum rel_'esh rate 1360 x 768
(at 60 llz)
hnage is llOt centerec on the screen Adjust the horizontal and vertical position.
The screen position must be adju>tcd un the output source (i.e. STB) with a digital >ignal.
if a s[ttI unage is displayed fbi When you need tu leave the monitor unused for an extended period of time. adjust the settings so
all extended period of time. residual that the monin)r auton3atically goes into energy saving nlode or activate> the screen saver to di>ptay
images or bhirrhlg may appear, nlovlng images.
The TFT LCD panel u>es a panel consisting of sub pixel_ (LN S2651D/LN $2652D: 3,147,264, LN S3251D/LN $3252D: 3,147,264,
LN S41151D/LN $4052D: 3,147,264) which require sophi>ticated technology to produce. However, there may be few bright or dark pixets on the
screen. These pixel_ will have nu inlpact on the perh_rmance of the product.
English-55