Samsung LN-S3252D Owner's Instructions Manual page 25

Picture Control
Using Automatic Picture Settings
Your TV has four automatic picture settings ("Dynamic", "Standard", "Movie", and "Custom") that arc preset at the factory.
You can activate either Dynamic, Standard, Movie, or Custom by making a selection fl'om the menu.
Or, you can select "Custom" which automatically recalls your personalized picture settings.
1. Press the MENU button to display the menu.
Press the A or - buttons to select "Picture", then press the ENTER_ button.
2. Press the ENTERS-' button to select "Mode".
Press the ENTER_ button again.
Press the .*- or - buttons to select the "Dynamic", "Standard", "Movie",
or "Custom" picture setting. Press the ENTER_ button.
* Choose Standard for the Standard factory settings.
'_Choose Movie when Watchingmovies.
', Choose Custom if you want to adjust the settingsaccordingto personalpreference.
:_ When in PC mode, Tint,Sharpnessand Color are not available.
>'- Picturemodeneedsto be adjustedseparatelyfor each input.
3, Press the _ or _ buttons to select "Contrast", "Brightness", "Sharpness",
"Color", or "Tint", then press the ENTER_ button.
4, Press the 4 or _. buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the _. button increases it.
Press the ENTER_ button.
Press the EXIT button to exit.
>- - "Tint" doesn't operate in HDMI, PC or any Component mode.
• The Tint cannot be adjusted while watching Digital TV.
• Each adjusted setting will be stored separately according to its input mode.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint, OSD color will also be
adjusted accordingly.
English-23