Samsung LN-S3252D Owner's Instructions Manual page 24

To Select the Source (depending on the model)
Use to select TV or other exlernal input sources connecled to the TV.
Use to select the input source of your choice.
1, Press the MENU button to display the menu.
Press the ENTER_ button to select 'qnput".
2, Press the ENTERS' button to select "Source List".
Press the ,,- or - buttons to select signal source, then press the ENTER_ button.
:_ When you connect equipment to the LCD, you can choose between the following sets of
jacks: TV, AVt, AV2, S-Video1, S-Video2, Component, PC, HDMIt, or HDMI2 on the
TV's rear panel,
HDMIt or HDMI2 input can only be selected when the external device is turned on and
connected via HDML
AV2/S-Video2 is placed on the side of the TV.
26 inch model only supports AV, S-Video, Component, PC, HDMIt, and HDMI2,
:_ You can choose only those external devices that are connected to the TV.
I_] _ _ so_f_,_.i 1V] I_} PresstheSOURCEbuttonontheremotecontroltoviewanexternalsignalsource,
17o Edit the Input Source Name (depending on the model)
Name the device conneclcd to the input jacks to make your input source selection easier.
t. Press the MENU button to display the menu.
Press the ENTER_ button to select "Input".
Press the A or - buttons to select "Edit Name", then press the ENTER_ button,
2, Press the _ or _ buttons to select "AVI", "AV2", "S-Video1", "S-Video2",
"Component", "PC", "HDMII" or "HDMI2" input jack, then press the
ENTER_ button.
26 inch model only supportsAV,S-Video, Component,PC, HDMI1,and HDMI2,
3, Press the ,,- or _ buttons to select "VCR", "DVD', "D-VHS", "Cable STB", "HD
STB', "Satellite STB", "PVR STB', "AV Receive€', "DVD Receiver', "GAME",
"Camcorder', "DVD Combo", "PC", "VOD STB', or "TV" input source, then press
the ENTER_ button,
Press the EXIT button to exit,
English-22