Set The Dvd/Vcr2 Channel - ProScan PS27125 User Manual

SET THE
DVD/VCR2
CHANNEL
The next step lets you set the DVDNCR2 channel. When you set the
DVDNCR2 channel, you're telling the TV what channel to tune to
when you press the DVD'.VCR2 button on the remote.
For example, if you have a DVD player connected to the Video 2 input
jacks on the back of the TV, you want the TV to tune to the Video 2
input channel when you press DVDoVCR2. If you don't have a
DVDeVCR2 component connected to the TV, skip this step or select
Not Connected from the DVDNCR2 Channel choice list. (For more,
see Auto Tuning in the Quick Reference section.)
1. Press MENU to bring up the DVDNCR2 choice list.
2.
3.
Point to the choice that matches the way you have your DVD
player or second VCR connected to the TV.
If you used the Connections Foldout to hook up your "IV, use the
table at right to select the DVDNCR2 channel.
Press MENU to continue.
If you used
Connection A
Connection B
Connection C
Connection D
Connection E
Connection F
Connection G
Connection H
Connection I
Select
Not Connected
Not Connected
Video 2 Input
Channel 3*
Video t Input
Not Connected
Not Connected
Video 2 Input
Channel 3*
* Or Channel 4, depending on how
your VCR's 3/4 switch is set.
25