What To Do If - Zanussi ZWN 7140 AL User Manual

bowl. Repeat the procedure until water stops
flowing out;
• clean the pump if necessary as previously de-
scribed;
• replace the emergency emptying hose in its
seat after having plugged it;
• screw the pump cover again and close the
door.

What to do if ...

Certain problems are due to lack of simple
maintenance or oversights, which can be solved
easily without calling out an engineer. Before
contacting your local Service Centre, please
carry out the checks listed below.
During machine operation it is possible that the
red pilot light of button 7 blinks, one of the fol-
lowing alarm codes appears on the display and
some acoustic signals sound every 20 seconds
to indicate that the machine is not working:
Problem
The machine does not start:
The machine does not fill:
www.zanussi.com
Important! Every time you drain the water
through the emergency emptying hose you must
pour 2 litres of water into the main wash
compartment of the detergent drawer and then
run the drain programme. This will activate the
ECO Valve device avoiding that part of the
detergent remains unused at next washing.
•
•
•
Once the problem has been eliminated, press
the button 7 to restart the programme. If after all
checks, the problem persists, contact your local
Service Centre.
The door has not been closed.
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the button 7 has not
been pressed.
• Please turn the selector dial and press the button 7 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The Child Safety Lock has been activated.
• Deactivate the Child Safety Lock.
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
• Clean the water inlet filters. (See "Cleaning the water inlet filters" for
more details).
The door is not properly closed.
• Close the door firmly.
: problem with the water supply.
: problem with the water draining.
: door open.
Possible cause/Solution
19